(???) ???.????
941.423.2800
PRIMERS
Quality begins with an excellent foundation...
our renowned Genteel Coatings Primers.
EP-708
Epoxy Primer
Genteel Coatings EP-708 Epoxy Primer is a fast dry, fast curing epoxy with excellent corrosion resistance and adhesion. This epoxy can be used on all properly prepared metals and some plastics. EP-708 Epoxy Primer can be directly topcoated, wet-on-wet with any topcoat system in 45-60 minutes @ 72°F (22.2°C).
This 1:1 mix epoxy uses EP-781 activator.
SE-678
Epoxy Primer
SE-678 is a two-component sanding epoxy primer/sealer; this 100% epoxy primer is a 4:1 mixing ratio with good film build and exceptional anti-corrosion properties for DTM applications. It has exceptional adhesion to properly sanded and cleaned bare metals, including aluminum. As a sealer SE-678 levels to a nearly texture-free surface with excellent gloss holdout. It can be sanded, when needed. SE-678 is V.O.C. compliant in North America at 2.1 V.O.C.
Mix 4:1 with SE-679 ACTIVATOR
2.1 VOC's
FS-4100
2K High Build Primer
A two-component urethane primer, designed for exceptionally high build with direct-to-metal properties. 2K Primer is great sanding, wet or dry after short dry times. Genteel Coatings FS-4100 primer mixes 4:1 with FS-4111 activator. Mixed 4:1:1 FS-4100 Primer can be used as a multiple panel sealer and provides minimal shrinkage and the maximum in color holdout properties.
GC-747
1K Acrylic Sealer
GC-747 1K Acrylic Sealer is a ready-to-spray, one component sealer that can be applied to previously coated substrates to provide uniform color. This sealer has excellent adhesion and color hold-out. GC-747 provides an extremely smooth surface and is highly resistant to lifting of undercoats. Can be used wet-on-wet application (requires sanding if dried overnight). Unused product can be poured back into the can.
GC-550
DTM Enamel Primer
GC-550 DTM Enamel Primer is a high build, industrial grade primer that can be applied to properly prepared bare steel, aluminum, fiberglass and composite plastics. GC-550 DTM Enamel Primer has excellent corrosion resistant properties when applied to bare steel. There is no need to apply a pre-treatment primer. GC-550 DTM Enamel Primer can be topcoated wet-on-wet without sanding after 30 minutes. One to two coat applications.
2.1 V.O.C.; 50 State Compliant
Excellent Corrosion Resistance
Wet on Wet Application
Eliminates the need for Pre-Treatment
Great Adhesion
8:1 Mix Ratio